| Author | Jamali, Abdul Sattar |
| Call Number | AIT RSPR no. ISE-01-02 |
| Subject(s) | Process control--Statistical methods
|
| Note | A research study submitted in partial fulfillment of the requirements for the degree of Master
of Engineering, School of Advanced Technologies |
| Publisher | Asian Institute of Technology |
| Series Statement | Research studies project report ; no. ISE-01-02 |
| Abstract | A primary objective of statistical process control (SPC) is to maintain quality characteristics
of items generated by a process as close as possible to target values for as much time, or
amount of production, as possible. Customers view point and expectations have changed
significantly in the past few years. Customers now do not merely expect the products to be
"within spec". They expect, rightly so, the products to be "on target". Uniformity has become
more and more important as the traditional goal of "aiming to be within specs" becomes less
and less relevant. So SPC can help companies cut costs, improve quality, and pursue
continuous improvement and also satisfy the customers. To move towards the achievement of
this objective a real case study has been selected. In this connection, practical importance of
process control tools has been introduced. To see the effectiveness of process and product
control system, it fully dependent on accurate (precision) measurements system. A brief and
comprehensive measurement system (Gage R&R) study has been introduced, not only this
case study, but for any measurement device through Minitab quality software. Data are also
analyzed by checking descriptive statistics, the normal assumption (i.e. Histogram, scatter
diagram, Hypothesis testing) through by Mintab. X and R-control chart are also designed to
see the pattern of the process and take any action according to analyzed of the pattern. After
control chart designed, to see whether it is capable or not means whether it is rightly on target
or not. How it performs? In this connection, process capability and process performances has
been calculated through Minitab and analyzed.
The main problem faced by Armature Resistance process is commutator fusing. There are
also internal as well as external customer complaints against commutator fusing. In this case
study a brief and comprehensive factors for commutators fusing are suggested. Suggestions
and recommendations about commutator fusing and also provide the ground to over come the
commutator fusing problem through design of experiments for further research study. |
| Year | 2001 |
| Corresponding Series Added Entry | Asian Institute of Technology. Research studies project report ; no. ISE-01-02 |
| Type | Research Study Project Report (RSPR) |
| School | School of Advanced Technologies (SAT) |
| Department | Department of Industrial Systems Engineering (DISE) |
| Academic Program/FoS | Industrial Systems Engineering (ISE) |
| Chairperson(s) | Ullah, A.M.M. Sharif; |
| Examination Committee(s) | Afzulpurkar, Nitin V. ;Voratas Kachitvichyanukul ; |
| Scholarship Donor(s) | H.M.King's Royal Thai Goverrunent (RTG) ; |
| Degree | Research Studies Project Report (M. Eng.) - Asian Institute of Technology, 2001 |