| Author | Lin, Hsi-pang |
| Call Number | AIT Thesis no. GT-93-21 |
| Subject(s) | Tunneling
hields (Geology)
|
| Note | A thesis submitted in partial fulfillment of the requirements for the degree
of Master of Engineering, School of Civil Engineering |
| Publisher | Asian Institute of Technology |
| Series Statement | Thesis ; no. GT-93-21 |
| Abstract | Concerning the cutting mechanism of the cutter face in shield , some torque
components are not clear yet. In the theoretic model developed for automatic
operation of shield machine, these equations concerne<l were proposed based on
some assumptions, and were nol confirmed whether are correct or not.
A simplified model for cutting mechanism was used in the laboratory to study
the torque behavior exhibited in dry sand under the variance of each type of
parameter concerned, then formulated this torque behavior in advance, and
compared with the equation proposed in theoretic model.
From the experimental investigation, the results show that the equation for
torque of pushing resistance for sand is slightly different from that proposed in
theoretic model. |
| Year | 1994 |
| Corresponding Series Added Entry | Asian Institute of Technology. Thesis ; no. GT-93-21 |
| Type | Thesis |
| School | School of Civil Engineering |
| Department | Other Field of Studies (No Department) |
| Academic Program/FoS | Geotechnical and Transportation Engineering (GT) |
| Chairperson(s) | Sugimoto, M. ;Seah, Tian Ho
|
| Examination Committee(s) | Noppadol Phien - wej ; |
| Scholarship Donor(s) | Government of Taiwan, Republic of China; |
| Degree | Thesis (M.Eng.) - Asian Institute of Technology, 1994 |
