Evaluation of some physico-chemical processes for treating textile wastewater

AuthorChen, Shu-liang
Call NumberAIT Thesis no. 632
Subject(s)Water--Pollution
Textile waste
Factory and trade waste
NoteA thesis submitted-in partial fulfillment of the requirements for the degree of Master of Engineering in the Asian Institute of Technology, Bangkok, Thailand.
PublisherAsian Institute of Technology
AbstractSeveral physico-chemical processes were studied in treating the high color, low BOD textile wastewater from a synthetic textile factory using polyester and rayon as raw materials. Among these processes are series filtration using shredded coconut husk fiber and burnt rice husk as filter media, granular and/or powdered activated carbon adsorptions, and chemical coagulation. Both series filtration and carbon adsorption were found ineffective due to poor color removal efficiency and short operational time. Chemical coagulation using alum as coagulant was found capable of removing 90% of color and 50% of COD at pH of 6.0 and dosage of 200 mg/l for a representative composite sample. 0.4 mg/l of Sanpolymer A510 was used as a coagulation aid to accelerate the settling of the precipitants. A. survey of the in-plant wastewater and an appraisal of-different treatment systems for the generated wastewaters was also made as part of the study.
Year1974
TypeThesis
SchoolStudent Research Before 1980
DepartmentOther Field of Studies (No Department)
Academic Program/FoSThesis (Year <=1979)
Chairperson(s)Htun, Maung Nay
Examination Committee(s)Pescod, M.B.
Scholarship Donor(s)Asian Institute of Technology
DegreeThesis (M. Eng.) - Asian Institute of Technology, 1974


Usage Metrics
View Detail2
Read PDF0
Download PDF0