AIT Thesis no.PP-09-04
Mixed acacia kraft pulping using a mixture of pin chips and mill standard chips
by Affan, Ibnu
|
AIT Thesis no.PP-09-05
Effect of ClO2 and H2O2 on the characteristics of bleached Acacia pulp
by Hariansyah, Budi
|
AIT Thesis no.PP-09-07
Eucalyptus CTMP and high yield kraft pulp in linerboard
by Tipnipa Cheerararuensak
|
AIT Thesis no.PP-09-08
Chemical additives and surfactants on kraft pulping of E. camaldulensis
by Hasan, Md. Jabed
|
AIT Thesis no.PP-09-09
Development of a data acquisition system for PPT Escher Wyss refiner
by Audhie, Ronald
|
AIT Thesis no.PP-09-10
Effect of bio-polymer latex on properties of coated paper
by Srikanth, N.
|
AIT Thesis no.PP-10-01
Effect of paper broke and filtrate water on paper properties
by Damrongjet Santijameroenkit
|
AIT Thesis no.PP-10-02
Bleaching comparison on acacia kraft pulp produced from continuous and batch cooking system
by Lasmaretty, Itsna Lathifah
|
AIT Thesis no.PP-10-03
Evaluation of oxygen delignification process on removing lipophilic extractive of acacia mangium and Acacia crassicarpa
by Sanyoto, Ari Aji
|
AIT Thesis no.PP-10-04
Effects of process, wet and variables on Alum - Cationic Rosin sizing & comparison with PAC - Cationic Rosin and AKD sizing
by Ma Tien Chuong
|
AIT Thesis no.PP-10-05
Non-chemical recycling of MOW by fractionation
by Tunchira Bunyaphiphat
|
AIT Thesis no.PP-10-06
The role of OCC long fiber fractionation on testliner strength
by Luong Chi Hieu
|
AIT Thesis no.PP-10-07
The role of sulphuric acid addition on hot chlorine dioxide bleaching of unbleached acacia kraft pulp
by Aman, Azka
|
AIT Thesis no.PP-10-08
Effect of chip thickness on kraft cooking and bleachability of acacia crassicarpa
by Dalimunthe, Radar Herri
|
AIT Thesis no.PP-10-09
A comparison study on three fast growing hardwood kraft pulps as material in uncoated fine paper
by Xu, Wenxia
|
AIT Thesis no.PP-10-10
Developing water resistant paper with poly (E-caprolactone) and soy protein isolated
by Nattinee Bumbudsanpharoke
|
AIT Thesis no.PP-11-01
Development of low basis weight base paper for medium weight coated paper
by Patwary, Md. Amirul Islam
|
AIT Thesis no.PP-11-02
Possibilities for partial replacement of wood fiber in kraft liner with non-wood
by Bunyarat Phiphatsirikajorn
|
AIT Thesis no.PP-11-05
Optimization of black liquor solid from fiberline into chemical recovery process to reach fuel potentiality of black liquor as renewable energy in pulp mill
by Riseta, Yuniar
|
AIT Thesis no.PP-11-06
Optimizing filler retention of mixed tropical hardwood based uncoated fine paper
by Wahyudi, Ferdian Alam
|