AIT Thesis no.PP-07-8
Effect of starch grades on coating color and coated paper properties
by Munika, Ika
|
AIT Thesis no.PP-07-9
Starch, soy protein, CMC, and PVOH as OBA carriers, and their effect on final coated paper properties
by Xiao, Na
|
AIT Thesis no.PP-08-05
Effect of plastic pigments and calendering on coating layer properties
by Djajasaputra, Anne Elizabeth
|
AIT Thesis no.PP-08-1
Bleachability of kraft pulps : acacia auriculiformis and the mixture of acacia auriculiformis and eucalyptus camaldulensis
by Le Van Hiep
|
AIT Thesis no.PP-08-10
Effect of binders on compressibility of the coating layer during calendering and properties of the coating layer
by Ming, Hui
|
AIT Thesis no.PP-08-11
Neural deinking of newspaper and magazine paper or office waste compared to alkaline deinking
by Islam, Md. Moidul
|
AIT Thesis no.PP-08-12
Role of chitosan on folding boxboard strength and printability
by Punnarai Wongwikkorn
|
AIT Thesis no.PP-08-13
Effect of coating formulation change with varying dosage of CMC and SB latex on coating color rheology and final properties of coated paper
by Kumar, Sudhir
|
AIT Thesis no.PP-08-14
Steps forward on developing a standard handsheet forming procedure at different filler loads
by Liu, Kaibao
|
AIT Thesis no.PP-08-15
Improving the brightness of recycled pulp for supercalendered (SC) - paper
by Hun, Donald
|
AIT Thesis no.PP-08-2
Optimization of PO stage in bleaching of eucalyptus pulp
by Yan, Guirong
|
AIT Thesis no.PP-08-3
Optimization of ECF bleaching for bagasse pulp
by Thongbai Phainarin
|
AIT Thesis no.PP-08-4
Cooking and bleaching process effect on fiber development behavior of acacia mangium kraft pulp in refining
by Butar-Butar, Agunan
|
AIT Thesis no.PP-08-6
Effects of calcium carbonate dose on surface properties of coated fine paper
by Han, Bing
|
AIT Thesis no.PP-08-7
Effect of using rodlike PCC in rotogravure coating
by Pasaribu, George Harison
|
AIT Thesis no.PP-08-8
Comparison of separate and mixed mechanical treatment on acacia kraft, eucalyptus kraft and aspen BCTMP pulps for fine paper
by Wang, Nianqing
|
AIT Thesis no.PP-08-9
Production of SC-A paper from lower grade waste paper
by Giana, Inda
|
AIT Thesis no.PP-09-01
Effects of latexes properties and binder type on coated paper properties
by Kumar, Pramod
|
AIT Thesis no.PP-09-02
A model to maximize the bending stiffness of two-ply paper or boards
by Chen, Zhijian
|
AIT Thesis no.PP-09-03
Effect of cooking kappa number on oxygen delignification and properties of bleached acacia pulp
by Napitupulu, Eka Hisar
|