AIT Thesis no.ST-20-13
Evaluation of nonlinear seismic response of mid-rise buildings with RC walls and infill walls by using a modified response spectrum analysis (MRSA) method
by Pradhananga, Anuj
|
AIT Thesis no.ST-20-14
Evaluation of nonlinear seismic responses of low- to mid-rise RC frame buildings with masonry infill walls by using a modified response spectrum analysis (MRSA) method
by Bhattarai, Kapil
|
AIT Thesis no.ST-20-15
Implication of performance-based design on resilience and cost of a tall building in the Philippines
by Gautam, Angshuman
|
AIT Thesis no.ST-20-16
A comparison of accidental eccentricity due to influencing factors with code-based approach
by Karunarathna, Pindeniya Appuhamilage Sarala
|
AIT Thesis no.ST-20-17
Calibration of structural models using measured building response
by Sapkota, Ashish
|
AIT Thesis no.ST-20-18
Seismic performance improvement of existing highway bridges by base isolation approach
by Nat Hanwiboonwat
|
AIT Thesis no.ST-20-19
Seismic performance evaluation of steel diagrid system for tall building in high wind and seismic region
by Seng Sorpichkapoun
|
AIT Thesis no.ST-20-20
Evaluation of seismic damage of tall buildings from acceleration response time histories by a modal decomposition approach
by Chananwath Sinthumongkhonchai
|
AIT Thesis no.ST-20-21
Evaluation of equivalent static wind forces for low-rise building from simultaneous pressure measurement data
by Piyawich Tanburinthip
|
AIT Thesis no.ST-20-22
The experiments on precast beams-column sub-assemblages using u-shell and grouted tube rebar splices
by Thanathip Wongsorod
|
AIT Thesis no.ST-20-23
Measurement of wind-induced dynamic stresses in large billboard structure
by Naditorn Pirisomboon
|
AIT Thesis no.ST-20-24
Evaluation of mega column, tubular system and core wall system for tall buildings in low to moderate seismic region
by San Thaw Tar Myint
|
AIT Thesis no.ST-20-25
Active control of wind induced responses using plasma actuators
by Shrestha, Saugat
|
AIT Thesis no.ST-20-26
Experiments on tension force carrying capacity of grouted rebar splice in steel pipe confinement
by Su Yee Lei
|
AIT Thesis no.ST-20-27
Development of high-strength lightweight concrete with expanded clay aggregate
by Peerawat Parnporamat
|
AIT Thesis no.ST-20-28
Experimental study on the beam-column connection for precast concrete frames using confined-splice system under reversed cyclic loadings
by Onprapha Uppakaew
|
AIT Thesis no.ST-20-29
Development of displacement measurement equipment using sampling moiré technique in single board computers
by Srikulnath Nilnoree
|
AIT Thesis no.ST-21-02
Rapid identification of seismic damage in tall buildings by using acceleration response time histories : effects of modelling errors & correction measures
by Liyanarachchi, Navindra
|
AIT Thesis no.ST-21-03
An experimental study of the mechanical properties and durability of basalt fiber reinforced preplaced aggregate concrete
by Amin, Mehmud Murshed Ul Al
|
AIT Thesis no.ST-21-04
A comparative study of the flexural behavior of preplaced lightweight aggregate concrete and normal weight reinforced concrete slabs
by Islam, Md Shahidul
|