Browse by Year


Rotation capacity of uniformly loaded reinforced concrete beams
by Wisuut Naksorn
call number: AIT Thesis no. 305
Routing of flows from peak load generation through river channel
by Surapong Winyawonk
call number: AIT Thesis no. 329
Salt water-fresh water interface during groundwater pumping and equivalent single phase flow system
by Chang, Yuang-yan
call number: AIT Thesis no. 311
Scour under offshore mobile jack-up rig legs
by Barradell-Smith, J. M.
call number: AIT Thesis no. 324
Sewage disposal into sea
by Chaudry, Zafar Iqbal
call number: AIT Thesis no. 310
Shear strength characteristics of Bangkok clay in the weathered zone (under Ko anisotropic consolidation)
by Chartri Gulachol
call number: AIT Thesis no. 363
Shear strength characteristics of Bangkok clay in the weathered zone /by ... and John D. Nelson
by Manoon Arayasiri
call number: AIT Research Report no.8
Shear strength characteristics of the stiff Bangkok clay / by ... and John D. Nelson
by Diti Hengchaovanich
call number: AIT Research Report no. 9
Shear strength characteristics of the stiff Bangkok clay under anisotropic consolidation
by Ahmad, Bashir
call number: AIT Thesis no. 364
Shear strength of Bangkok clay under vibratory loading
by Pranai Satyavanija
call number: AIT Thesis no. 368
Stochastic models of monthly flows at Bhumiphol Dam
by Khaleel, Raziuddin
call number: AIT Thesis no. 309
The concentric and eccentric shear strengths of welded connections
by Worawit Kampanya
call number: AIT Thesis no. 299
The effect of deep well pumping on land subsidence in the Bangkok area
by Titi Paveenchana
call number: AIT Thesis no. 369
The effect of joint rigidity on frame stability
by Suphot Phongkidakarn
call number: AIT Thesis no. 298
The effect of repeated loading cycles on restrained reinforced concrete T-beams
by Hossain, A. B. M.
call number: AIT Thesis no. 296
The elastic flexural-torsional buckling of beam-columns by discrete element techniques
by Casem, Conrado Sibayan
call number: AIT Thesis no. 295
The finite element method in plate bending analysis : triangular elements with assumed stress distributions
by Song, Terng-fen
call number: AIT Thesis no. 294
The finite-element method in plate bending analysis
by Pricha Ngaocharoenchitr
call number: AIT Thesis no. 297
The harvesting of algae through chemical flocculation and flotation
by Batallones, Elma D.
call number: AIT Thesis no. 321
The permeability of Bangkok clay
by Sopon Duangkhae
call number: AIT Thesis no. 340